Specifications:Dell™4100MPProjectorUser'sGuide
Single-chipDLP™DDR(doubledatarate)technology
2000:1 Typical (Full On/Full Off)
70% Typical (Japan Standard)
250-watt user-replaceable UHP 1500-hour lamp (up to 3000 hours in eco mode)
F/2.43~2.66, f=28.0~33.6mm with 1.2x manual zoomed lens
24.4-292.5 inches (diagonal)
Vertical Keystone Correction
Horizontal Keystone Correction
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM, and HDTV (1080i, 720p, 576i/p, 480i/p)
compatibility
Composite video, Component video and S-video capability
Universal 90-240V AC 50-60Hz with PFC input
2 speakers, 2 watts per channel RMS
<36dB(A) Full-on mode, 33dB(A) Eco-mode
External 11.9 x 9.9 x 4.5 ± 0.04 inches (302 x 251 x 114.5 ± 1mm)
Operatingtemperature:5
o
C–35
o
C (41
o
F–95
o
F)
Humidity:80%maximum
Storagetemperature:–20
o
C to 60
o
C (–4
o
F to 140
o
F)
Humidity:80%maximum
FCC,CE,VCCI,UL,cUL,TüVGS,ICES-003, MIC, C-
Tick, GOST, PCBC, CCC, PSB, EZU, NOM, S
Power: AC power input socket
Computer input: one M1-DA for analog/digital/component, HDTV input signals, one 15-pin D-
analog input/ component, HDTV input signals
Computer output: one 15-pin D-sub
Video input: 3 RCA connectors for component video /HDTV input, one mini-DIN 4-pin S-
one RCA jack for composite video input
Audio input: one phone jack (diameter 3.5mm)
DC jack 12 volt @ 200mA output, relay control for automatic projection screen control
One mini-DIN RS232 for wired remote projector control from PC
RS232 Pin Assignment (facing projector)
RS232 Protocol
l Communication Settings