70 RAID Configuration and Management
3
Use the spacebar to deselect the settings for the options in the
Settings
box.
4
Press <Tab> to move the cursor to the
Advanced
box.
5
Press the spacebar to select
Advanced
.
An
X
displays next to
Advanced
.
6
Press <Tab> to move the cursor to
Select Defaults
.
7
Press the spacebar to select
Select Defaults
.
The defaults are automatically selected for the controller settings and display in the
Settings
box.
An
X
displays by each setting which is enabled by default.
Dell_PERC5_UG.book Page 70 Tuesday, February 13, 2007 6:02 PM
To Next Page
Loading...
