Dell 5600W User Manual

Dell UPS Site Preparation Guide, EMEA (230V) Revision 1, February 2012
Dell UPS Site Preparation Guide, EMEA.
Applies Dell Rackmount UPS Models, 3750W, 4200W & 5600W
Note: This document is for guidance only. Actual installation instructions and safety cautions are included within the UPS User
Guide.
Site Preparation Checklist
Installation site meets minimum environmental requirements.
Ensured all required accessories have been ordered with the UPS
Electrical Preparation
Required electrical supply is available.
Scheduled an electrician to install the Dell UPS.
Provided a copy of this preparation guide to the electrician.
Made electrician aware of the electrician’s checklist in the User Manual.

Dell 5600W Specifications

General

Brand	Dell
Model	5600W
Category	UPS
Language	English

Summary

UPS Site Preparation

Physical UPS Requirements

Details physical dimensions and weights for different Dell UPS models.

Environmental UPS Requirements

Specifies suitable environmental ranges for temperature, humidity, and elevation.

UPS Heat Output

Lists heat loss and BTU values for various UPS models in different modes.

Optional UPS Accessories

Describes optional accessories, their importance, and purpose.

UPS Electrical Preparation

Dell UPS Electrical Requirements

Details input voltage, power draw, overcurrent protection, and wire size.

REPO Switch Electrical Requirements

Explains REPO switch functionality, connections, and safety warnings.

UPS Electrical Wiring Schematics

Schematic: Optional Power Input Cord Installation

Shows wiring for models excluding 5600W Online with an optional input cord.

Schematic: Hardwired Installation

Illustrates hardwired installation for all models, including 5600W Online.

UPS Overcurrent Protection

Protection for Rack Models (Excl. 5600W Online)

Specifies requirements for a dedicated branch circuit and 2-pole overcurrent protection.

Protection for 5600W Online UPS

Details the need for an external isolating device and warning labels for backfeed protection.

Optional 32A Input Cord Installation

Receiving and Installing the UPS

Equipment Inspection

Procedures for checking for shipping damage and filing claims.

UPS Unpacking Guide

Instructions on removing parts and referring to user guides for unpacking.

Installing UPS into Rack

Steps for installing the UPS chassis, battery modules, and optional components into a rack.