Dell Alienware 13 - Replacing the Coin-Cell Battery; Procedure; Post-Requisites

Replacing the Coin-Cell
Battery
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer.
After working inside your computer, follow the instructions
in After Working Inside Your Computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the connector on the system board.
Post-requisites
1 Follow the procedure from step 2 to step 7 in “Replacing the power-adapter
port”.
2 Replace the display assembly.
3 Follow the procedure from step 5 to step 9 in “Replacing the palm rest”.
4 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive” .
5 Replace the base panel.
77