14
Set Direct Fax
When remote authentication is used, follow the procedure below to set [Direct Fax]
to [Disabled].
1
Select [System Settings] on the [Tools] screen.
2
Select [Fax Service Settings].
3
Select [Fax Control].
4
Select [Direct Fax].
5
Select [Change Settings].
6
Select [Disabled].
7
Select [Save].
8
To exit the [Fax Control] screen, select [Close].
Set Self Test
Follow the procedure below to configure the Self Test settings.
1
Select [System Settings] on the [Tools] screen.
2
Select [Common Service Settings].
3
Select [Maintenance].
4
Select [Power on Self Test].
5
Select [On].
6
Select [Save].
7
To exit the [Maintenance] screen, select [Close].
Set Software Download
For the secure operation of the machine, follow the procedure below to set [Software
Download] to [Disabled].
1
Select [System Settings] on the [Tools] screen.
2
Select [Common Service Settings].
3
Select [Other Settings].
4
Select [Software Download].
5
Select [Change Settings].
6
Select [Disabled].
7
Select [Save].
8
To exit the [Tools] screen, select [Close] twice.
9
Select [Reboot now] on the confirmation screen.
To Next Page
Loading...
