Dell D10U - System Board Connector Maximum Add-In Card Allowable Dimensions; Operating System

System board connector maximum add-in card
allowable dimensions
Table 13. System board connector maximum add-in card allowable dimensions
Tower Small Form Factor Micro
PCIe x16 Connector (BLUE) (Voltage
supported 3.3V/12V)
1 1 NA
Height (inches / centimeters) 4.38 / 11.12 2.73 / 6.89 NA
Length (inches / centimeters) 6.6 / 16.77 6.6 / 16.77 NA
Maximum Wattage 75 W 50 W NA
PCIe x1 Connector (Voltage supported
3.3/12V)
3 1 NA
Height (inch / cm) 4.38 / 11.12 2.73 / 6.89 NA
Length (inch / cm) 4.5 / 11.44 6.6 / 16.77 NA
Maximum Wattage 10 W 25 W NA
Operating system
This topic lists the operating system supported by
Table 14. Operating system
Operating system Tower/Small form factor/Micro
Windows operating
system
Microsoft Windows 10 Home (64-bit)
Microsoft Windows 10 Pro (64-bit)
Microsoft Windows 10 Pro National Academic
Microsoft Windows 10 Home National Academic
Microsoft Windows 10 China
Other Ubuntu 18.04 LTS (64-bit)
Neokylin v6.0 (China only)
Commercial Platform Windows 10 N-2 and 5 year OS Supportability
All newly introduced 2019 and later commercial platforms (Latitude, OptiPlex, and Precision) will qualify and
ship with the most current factory installed Semi-Annual Channel Windows 10 version (N) and qualify (but
not ship) the previous two versions (N-1, N-2). This device platform OptiPlex 3070 will RTS with Windows 10
version v19H1 at time of launch, and this version will determine the N-2 versions that are initially qualied for
this platform.
For future versions of Windows 10, Dell will continue to test the commercial platform with coming Windows 10
releases during device production and for ve years post-production, including both fall and spring releases
from Microsoft.
Please reference the Dell Windows as a Service (WaaS) website for additional information on N-2 and 5 year
Windows OS supportability. Website can be found at this link:
System specications 17