Table 38. System setup options—Passwords menu(continued)
Passwords
NOTE: This option does not remove the requirement to enter the password
after shutting down.
By default, the Password Bypass option is disabled.
For additional security, Dell Technologies recommends keeping the Password
Bypass option enabled.
Password Changes
Allow Non-Admin Password Changes The Allow Non-Admin Password Changes option in BIOS setup allows an end
user to set or change the computer or hard drive passwords without entering
the administrator password. This gives an administrator control over the BIOS
settings but enables an end user to provide their own password.
By default, the Allow Non-Admin Password Changes option is disabled.
For additional security, Dell Technologies recommends keeping the Allow Non-
Admin Password Changes option disabled.
Admin Setup Lockout The Admin Setup Lockout option prevents an end user from even viewing the
BIOS setup configuration without first entering the administrator password (if
set).
By default, the Admin Setup Lockout option is disabled.
For additional security, Dell Technologies recommends keeping the Admin Setup
Lockout option disabled.
Master Password Lockout
Enable Master Password Lockout The Master Password Lockout setting allows you to disable the Recovery
Password feature. If the computer, administrator, or hard drive password is
forgotten, the computer becomes unusable.
NOTE: When the owner password is set, the Master Password Lockout
option is not available.
NOTE: When an internal hard drive password is set, it must first be cleared
before Master Password Lockout can be changed.
By default, the Enable Master Password Lockout option is disabled.
Dell does not recommend enabling the Master Password Lockout unless you
have implemented your own password recovery computer.
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert Controls access to the Physical Security ID (PSID) revert of NVMe hard drives
from the Dell Security Manager prompt.
By default, the Enable Allow Non-Admin PSID Revert option is disabled.
Table 39. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates Enables or disables BIOS updates through UEFI capsule update packages.
NOTE: Disabling this option blocks the BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS).
By default, the Enable UEFI Capsule Firmware Updates option is enabled.
BIOS Recovery from Hard Drive Enables or disables the user to recover from certain corrupted BIOS conditions
from a recovery file on the user primary hard drive or an external USB key.
By default, the BIOS Recovery from Hard Drive option is enabled.
BIOS Setup 123
Restricted - Confidential
To Next Page
Loading...
