Figure 30. Installing the graphics card
Steps
1.
NOTE: Ensure that PCIe door is in open position and and the release tab on the PCIe slot (SLOT 2) is downwards.
Align the graphics card with the connector on the system board.
2. Gently press down on the graphics card till the tab on the PCIe card connector (SLOT 2) locks in place.
3. Close the PCIe latch to secure the graphics card in PCI card connector (SLOT 2).
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
72
Removing and installing Customer Replaceable Units (CRUs)
Restricted - Confidential
To Next Page
Loading...
