3. Close the front panel door.
4. Install the:
a. front bezel
b. side cover
5. Follow the procedure in After Working Inside Your Computer.
2.5-inch hard drive
Removing the 2.5–inch drive from the drive bracket
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
a. side cover
b. front bezel
c. 2.5–inch drive assembly
3. To remove the drive:
a. Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1].
b. Lift the drive out of the drive bracket [2].
Disassembly and reassembly
21
To Next Page
Loading...
