Identifier GUID-C99B7D28-F3BA-4D20-84E4-8494907865F7
Status Released
Video screen options
GUID-C99B7D28-F3BA-4D20-84E4-8494907865F7
Option Description
Multi-Display This option enables or disables Multi-Display. It should be enables for Windows 7 or later. This feature is not
applicable to other operating systems.
• Enable Multi-Display: This option is enabled by default.
Primary Display This option determines which video controller becomes the primary display when multiple controllers are available
in the system
• Auto: This option is enabled by default.
• Intel HD Graphics
• NVIDIA HD Graphics
Identifier GUID-5E51D72D-7599-49A0-8CF2-7FE41D276A4A
Status Released
Security screen options
GUID-5E51D72D-7599-49A0-8CF2-7FE41D276A4A
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password.
Deleting the admin password automatically deletes the system password and the hard drive
password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
Internal HDD-0
Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Internal HDD-3
Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule
Firmware Update
This option controls whether the system allows the BIOS updates through UEFI capsule update packages. This
option is enabled by default.
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
• TPM On (enabled by default)
System setup 23
To Next Page
Loading...
