Option Description
Enable Intel Virtualization Technology (default).
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Wireless screen options
Option Description
Wireless Device
Enable
Allows you to enable or disable internal wireless devices.
• WLAN/WiGig (default)
• Bluetooth (default)
Maintenance screen options
Option
Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
SERR Messages This field controls the SERR message mechanism. Some graphic card required the SERR message.
• Enable SERR Messages (default)
BIOS Downgrade This field controls flashing of the system firmware to pervious revisions.
Allows BIOS Downgrade (Enabled by default)
Data Wipe This field enables user to erase data from all internal storage device.
BIOS Recovery Allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard drive.
Enabled by default.
First Power On
Date
This option lets you set Ownership date. This option is disabled by default.
System Log screen options
Option
Description
BIOS Events Allows you to view and clear the System Setup (BIOS) POST events.
Advanced configuration options
Option
Description
ASPM Allows you to set the ASPM level.
• Auto (default)
• Disabled
• L1 Only
System setup 21
To Next Page
Loading...
Need help?
General
