8. Slot 7
Since DD6300, DD6800, and DD9300 is a data backup appliance, it is only supported
in fixed configurations. The fixed configurations define the exact slots into which the
I/O modules may be inserted. The processors directly drive the eight I/O module slots,
meaning all slots are full performance.
The non-optional SAS, NVRAM, and 10GBaseT I/O modules are allocated to fixed
slots. The optional Host Interface I/O modules are used for front end networking and
Fibre Channel connections. The quantity and type of these I/O modules is
customizable, and there are many valid configurations.
DD6300 slot map
Slot 0, Slot 1, Slot 2 (except when it is marked "Reserved") are populated with the
required I/O modules and are not optional. I/O module slots 3-7 contain optional Host
Interface I/O modules and can contain specific I/O modules or no I/O modules at all.
Table 12 DD6300 I/O slot module mapping
Tier Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7
AIO Expanded NVRAM
8g Model
3
Quad Port
10 GBase-
T
Reserved (Optional)
Quad Port
10GbE SR,
Quad Port
10 GBase-
T, or Dual
Port 16
Gbps Fibre
Channel
(Optional)
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
(Optional)
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
(Optional)
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
(Optional)
Quad Port 6
Gbps SAS
a
AIO NVRAM
8g Model
3
Quad Port
10 GBase-
T
Reserved Quad Port
10GbE SR,
Quad Port
10 GBase-
T, or Dual
Port 16
Gbps Fibre
Channel
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
Quad Port 6
Gbps SAS
a
a.
Optional in DD6300 configurations, but required with one or more external storage shelves.
DD6800 and DD9300 slot map
I/O module slots 3–6 contain optional Host Interface I/O modules and can contain
specific I/O modules or no I/O modules at all. Slot 0, Slot 1, Slot 2, and Slot 7 are
populated with the required I/O modules and are not optional.
Table 13
DD6800 and DD9300 I/O module slot mapping
Tier Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7
DLH NVRAM
8g Model
3
Quad
Port 10
GBase-T
Quad Port 6
Gbps SAS
Quad Port
10GbE SR,
Quad Port
10 GBase-T,
or Dual Port
16 Gbps
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
Quad Port
10GbE SR,
Quad Port
10 GBase-T,
or Dual Port
16 Gbps
Quad Port
10GbE SR,
Quad Port 10
GBase-T, or
Dual Port 16
Gbps Fibre
Channel
Quad Port 6
Gbps SAS
DLH Extended
Retention/DD
Cloud Tier
Data Domain DD6300, DD6800, and DD9300 Hardware Overview
I/O modules 23
To Next Page
Loading...
