Appendix 93
Memory
Architecture DDR SDRAM
Memory connectors two
Memory capacities 128-, 256-, or 512-MB
Minimum memory 128 MB shared DDR SDRAM
NOTE: Between 32 and 64 MB of system memory may be
allocated to support graphics, depending on system
memory size and other factors.
Maximum memory 1 GB
Memory type PC2100 (266-MHz) DDR SDRAM (non-ECC)
Drives
Externally accessible two 5.25-inch bays
one 3.5-inch bay
Internally accessible one bay for 1-inch–high IDE hard drive
Ports and Connectors
Externally accessible:
Serial 9-pin connector; 16550C-compatible
Parallel 25-hole connector (bidirectional)
Video 15-hole connector
Keyboard 6-pin mini-DIN connector
Mouse 6-pin mini-DIN connector
USB two front-panel and four back-panel USB
2.0–compliant connectors
Network RJ-45 connector
Audio three back miniature connectors for line-in, line-out,
and microphone
Headphone one front miniature connector for line-out
Internally accessible:
Primary IDE channel 40-pin connector on PCI local bus
Secondary IDE channel 40-pin connector on PCI local bus
Floppy drive 34-pin connector
To Next Page
Loading...
