96 Removing and Installing Parts
www.dell.com | support.dell.com
Installing a CD/DVD Drive
1
Follow the procedures in "Before You Begin" on page 53.
2
If you are installing a new CD/DVD drive rather than replacing a drive, remove the drive-
panel inserts (see page 78).
3
Gently slide the drive into place until you feel a click or feel the drive securely installed.
NOTE:
If you are installing a new CD/DVD drive rather than replacing a drive, remove the
drive panel inserts and slide the drive into place. Check all cable connections, and fold cables
out of the way to provide airflow for the fan and cooling vents.
CD/DVD drive
screws (4)
To Next Page
Loading...
