Dell Dimension 8300 Series - Drive Performance Issues

Back to Contents Page
Technical Specifications
Dell™Dimension™8300SeriesServiceManual






Microprocessor
Memory
Computer Information
Video
Audio
Expansion Bus
Drives
Connectors
Controls and Lights
Power
Physical
Environmental
Microprocessor
Microprocessor type
Intel®Pentium®4 microprocessor (2.4, 2.6, 2.8, 3.0,
3.2, and 3.4 for 800 FSB, and 2.4, 2.66, 2.8, and 3.06
for 533 FSB)
L1 cache
8 KB
L2 cache
512-KB or 1-MB pipelined-burst, eight-way set
associative, write-back SRAM
L3 cache
2 MB
NOTE: L3 cache is available only with Intel Pentium 4
Extreme Edition processors that support Hyper-
Threading technology.
Memory
Type
DDR 333 or 400 (non-ECC)
Memory connectors
four
Memory capacities
128-, 256-, 512-MB, and 1-GB non-ECC
Minimum memory
256 MB
Maximum memory
4 GB
NOTE: See "Addressing Memory with 4-GB
Configurations" for the amount of memory available
to the operating system.
BIOS address
F8000h
Computer Information
System chip set
Intel 875P
DMA channels
eight
Interrupt levels
15
BIOS chip
4 Mb
NIC
integrated PCI Network Interface
System clock
533- or 800-MHz data rate
Video
Type
AGP 8X
Audio

Type
Analog Devices AD1980 AC97 Codec
NOTE: This audio type is present only on computers
with integrated sound capabilities.
ExpansionBus
Bus types
PCI and AGP
Bus speed
PCI: 33 MHz
AGP: 133 MHz
AGP

connector
one
connector size
172 pins