To Next PageTo Next PageHow to fix memory configuration or compatibility error on Dell Desktop?
To fix a memory configuration or compatibility error on your Dell Desktop: * Ensure that no special memory module/memory connector placement requirements exist. * Verify that the memory modules that you are installing are compatible with your computer.
What to do if the power light is off on my Dell Dimension 9100?
If the power light is off on your Dell Desktop, try these steps: 1. Reseat the power cable into both the power connector on the back of the computer and the electrical outlet. 2. Ensure that the power strip is plugged into an electrical outlet and that the power strip is turned on. 3. Ensure that the electrical outlet is working by testing it with another device, such as a lamp. 4. Ensure that the main power cable and front panel cable are securely connected to the system board.
How to fix a possible expansion card failure in Dell Desktop?
To resolve a possible expansion card failure on your Dell Desktop: 1. Determine if a conflict exists by removing a card (not a graphics card) and restarting the computer. 2. If the problem persists, reinstall the card that you removed, remove a different card, and then restart the computer. 3. Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed for resource conflicts.
What to do if there is a memory failure in my Dell Desktop?
To address a memory failure in your Dell Desktop: * If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. * If available, install properly working memory of the same type into your computer.
How to troubleshoot a possible graphics card failure on a Dell Dimension 9100 Desktop?
To resolve a possible graphics card failure on your Dell Desktop: * If the computer has a graphics card, remove the card, reinstall it, and then restart the computer. * If the problem still exists, install a graphics card that you know works and restart the computer.
What to do if no memory modules are detected in my Dell Dimension 9100?
To resolve the issue of no memory modules being detected in your Dell Desktop: * If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. * If available, install properly working memory of the same type into your computer.
How to fix a possible processor failure on Dell Desktop?
To resolve a possible processor failure on your Dell Desktop, reinstall the processor and restart the computer.
What to do in case of a possible USB failure on Dell Desktop?
To address a possible USB failure on your Dell Desktop, reinstall all USB devices, check cable connections, and then restart the computer.
How to troubleshoot a possible floppy drive or hard drive failure on Dell Dimension 9100?
To resolve a possible floppy drive or hard drive failure on your Dell Desktop, reseat all power and data cables and restart the computer.
What to do if another failure has occurred on my Dell Dimension 9100 Desktop?
To solve the problem when another failure has occurred on your Dell Desktop: * Ensure that the cables are properly connected to the system board from the hard drive, CD drive, and DVD drive. * If there is an error message on your screen identifying a problem with a device, check that device. * Check system setup to make sure the boot sequence is correct.
General| Audio | Integrated 7.1 Channel Audio |
|---|---|
| Operating System | Windows XP, Windows Vista |
| Chipset | Intel 945P Express |
| Processor | Intel Pentium D, Intel Core 2 Duo |
| RAM | Up to 4GB DDR2 SDRAM |
| Storage | Up to 1TB SATA HDD |
| Graphics | Integrated Intel Graphics Media Accelerator 950 or optional ATI Radeon |
| Optical Drive | DVD-ROM, DVD+/-RW |
| Networking | Integrated Gigabit Ethernet |
| Expansion Slots | 1 PCI Express x16, 1 PCI Express x1, 2 PCI |
| Ports (Front) | 2 USB 2.0, Microphone, Headphone |
| Ports (Rear) | Ethernet |
