Removing and Installing Parts 93
6
If you are installing a new floppy drive rather than replacing a drive, remove the drive-panel inserts (see
"Floppy Drive" on page 90).
7
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
8
Replace the drive panel (see "Replacing the Drive Panel." on page 83).
9
Replace the computer cover (see "Replacing the Computer Cover" on page 102).
NOTICE: To connect a network cable, first plug the cable in to the network device and then plug it in to the
computer.
10
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
11
Enter system setup (see "System Setup" on page 109) and select the appropriate
Diskette Drive
option.
12
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 49).
power cable
data cable
To Next Page
Loading...
