Weekly Replication Schedule Example
The following example shows how to set up a weekly Replication schedule with a start time at 01:00 am on Saturday and
a stop time at 01:00 am on Sunday. The DR Series system uses the 24-hour clock convention for its time keeping in which
each day is divided into twenty-four 1-hour segments.
NOTE: Replication schedules can only be set on individual replication-enabled source containers that you select
from the Container drop-down list.
• Select 01 in the hours pull-down list and 00 in the minutes pull-down list to set a Start Time of 01:00 for Saturday.
• Select 01 in the hours pull-down list and 00 in the minutes pull-down list to set a Stop Time of 01:00 for Sunday
NOTE: You need to click Set Schedule for the DR Series system to accept your Replication schedule.
For more information on Replication schedules, see Creating a Replication Schedule.
98
To Next Page
Loading...
