213Network
Configure Your Wi-Fi Direct Network Using the One-Push Method
Related Models:Dell E514dw / Dell E515dw
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
1. Press Menu.
2. Press p or q to select the Network option, and then press OK.
3. Press p or q to select the Wi-Fi Direct option, and then press OK.
4. Press p or q to select the Push Button option, and then press OK.
5. When Wi-Fi Direct On? appears, enable the Wi-Fi Direct network.
6. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device and press OK. appears on the machine's LCD. Press
OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Clear.
7. Do one of the following:
• When your Dell machine is the Group Owner (G/O), connect your mobile device to the machine directly.
• When your Dell machine is not the G/O, it will display available device names with which to configure a Wi-
Fi Direct network. Press p or q to select the mobile device you want to connect to and press OK. Search for
available devices again by pressing Rescan.
8. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the
Wi-Fi Direct network setup.
Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
Related Models:Dell E514dw / Dell E515dw
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network:
1. Press Menu.
2. Press p or q to select the Network option, and then press OK.
3. Press p or q to select the Wi-Fi Direct option, and then press OK.
4. Press p or q to select the Group Owner option, and then press OK.
5. Press p or q to select the On option, and then press OK.
6. Press p or q to select the Push Button option, and then press OK.
7. When Wi-Fi Direct On? appears, enable the Wi-Fi Direct network.
8. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) when Activate Wi-Fi Direct on other device and press OK. appears on the
machine's LCD. Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Clear.
9. If your mobile device connects successfully, the machine's LCD displays Connected. You have completed the
Wi-Fi Direct network setup.
To Next Page
Loading...
