90 Print
2. Press p or q to display the Printer option, and then press OK.
3. Press p or q to display the Emulation option, and then press OK.
4. Select the emulation mode you want.
5. Press Cancel.
Change 2-Sided Print Settings
Change the settings for printing on both sides of the paper from your machine's control panel.
Settings in the printer driver always take priority over settings you change manually on the control panel. If you do
not print 2-sided frequently, select None for the 2-sided / Booklet pull down list in the printer driver, and use the
control panel to turn it on manually only when you want to print on both sides of the paper.
1. Press Menu.
2. Press p or q to display the Printer option, and then press OK.
3. Press p or q to display the 2-sided option, and then press OK.
4. Press p or q to display the Off, On(Long Edge), or On(Short Edge) option, and then press OK.
5. Press Cancel.
Auto Continue
This setting enables the machine to automatically clear a paper size error and use any compatible paper from other
paper trays to complete the print job.
1. Press Menu.
2. Press p or q to display the Printer option, and then press OK.
3. Press p or q to display the Auto Continue option, and then press OK.
4. Press p or q to display the On or Off option, and then press OK.
5. Press Cancel.
Restore Printer Factory Settings
Use this function to return the machine's printer settings to the factory settings.
This will not reset the network settings.
1. Press Menu.
2. Press p or q to display the Printer option, and then press OK.
3. Press p or q to display the Reset Printer option, and then press OK.
4. Follow the machine's instruction to reset printer settings.
5. Press Cancel.
To Next Page
Loading...
