260 ControlCenter
Advanced Settings
Configure advanced settings by clicking the Advanced Settings button
in the Scan Settings dialog box.
• Brightness
Set the Brightness level by dragging the slider to the right or left to
lighten or darken the image. If the scanned image is too light, set a
lower brightness level and scan the document again. If the image is
too dark, set a higher brightness level and scan the document again.
• Contrast
Increase or decrease the Contrast level by moving the slider to the
right or left. An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in gray areas. You can
also enter a value in the box to set the contrast.
• Remove Background Color
Remove the base color of documents to make the scanned data more
recognizable. When you use this function, select from three settings:
high, medium, and low.
(Available only for the Auto, True Gray and 24bit Color options)
Yes Yes Yes Yes
Restore Defaults
Select this option to restore all settings to their factory setting values.
Yes Yes Yes Yes
To Next Page
Loading...
