Table 14. HTTP Device n Settings details (continued)
Option Description
Prefix Length: IPv6 Prefix Length (0-128) for this HTTP Device.
Vlan Enables Vlan for HTTP device. This option is set to Enable or Disable. This option is set to
Disable by default.
Vlan ID Shows the Vlan ID for the HTTP device
Vlan Priority Shows the Vlan Priority for the HTTP device.
DHCP Enables or disables DHCP for this HTTP device. This option is set to Enable by default.
IP Address Specifies IP address for the HTTP device.
Subnet Mask Specifies subnet mask for the HTTP device.
Gateway Specifies gateway for the HTTP device.
DNS info via DHCP Enables or disables DNS Information from DHCP. This option is set to Enable by default.
Primary DNS Specifies the primary DNS server IP address for the HTTP Device.
Secondary DNS Specifies the secondary DNS server IP address for the HTTP Device.
URI Obtain URI from the DHCP server if not specified
TLS Authentication
Configuration
Specifies the option for TLS authentication configuration.
TLS authentication mode Enables or disables the device's boot TLS authentication mode. This option is set to None
or One way. This option is set to None by default. If this option is set to None, the HTTP
server and the client will not authenticate each other for the boot. When this option is set
to One way, the HTTP server will be authenticated by the client, while the client will not
be authenticated by the server. Read-only if System BIOS Settings > Network Settings >
HTTP Device n is set to Disabled n = 1, 2, 3, 4, etc. depending on which HTTP device is used.
For example: TLS authentication mode of HTTP Device 1 cannot be changed when HTTP
Device1 is disabled.
Table 15. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to Disabled by default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device.
Table 16. ISCSI Device1 Settings screen details
Option Description
Connection 1 Enables or disables the iSCSI connection. This option is set to Disable by default.
Connection 2 Enables or disables the iSCSI connection. This option is set to Disable by default.
Connection 1 Settings Enables you to control the configuration for the iSCSI connection.
Connection 2 Settings Enables you to control the configuration for the iSCSI connection.
Connection Order Enables you to control the order for which the iSCSI connections will be
attempted.
Pre-operating system management applications 13
To Next Page
Loading...
