Table 23. System Security details (continued)
Option Description
environment and new UEFI boot entries are forced to be at the end of the current boot
order.
Secure Boot Enables Secure Boot, where the BIOS authenticates each pre-boot image by using the
certificates in the Secure Boot Policy. Secure Boot is set to Disabled by default.
Secure Boot Policy When Secure Boot policy is set to Standard, the BIOS uses the system manufacturer’s
key and certificates to authenticate pre-boot images. When Secure Boot policy is set to
Custom, the BIOS uses the user-defined key and certificates. Secure Boot policy is set
to Standard by default.
Secure Boot Mode Configures how the BIOS uses the Secure Boot Policy Objects (PK, KEK, db, dbx).
If the current mode is set to Deployed Mode, the available options are User Mode and
Deployed Mode. If the current mode is set to User Mode, the available options are
User Mode, Audit Mode, and Deployed Mode.
Table 24. Secure Boot Mode
Options Descriptions
User Mode
In User Mode, PK must be installed, and BIOS performs signature
verification on programmatic attempts to update policy objects.
The BIOS allows unauthenticated programmatic transitions between
modes.
Deployed
Mode
Deployed Mode is the most secure mode. In Deployed Mode, PK
must be installed and the BIOS performs signature verification on
programmatic attempts to update policy objects.
Deployed Mode restricts the programmatic mode transitions.
Audit Mode
In Audit mode, PK is not present. The BIOS does not authenticate
programmatic updates to the policy objects, and transitions between
modes. The BIOS performs a signature verification on pre-boot images
and logs the results in the image Execution Information Table, but
executes the images whether they pass or fail verification.
Audit Mode is useful for programmatic determination of a working set
of policy objects.
Secure Boot Policy Summary Specifies the list of certificates and hashes that secure boot uses to authenticate
images.
Secure Boot Custom Policy
Settings
Configures the Secure Boot Custom Policy. To enable this option, set the Secure Boot
Policy to Custom option.
Creating a system and setup password
Prerequisites
Ensure that the password jumper is enabled. The password jumper enables or disables the system password and setup password
features. For more information, see the System board jumper settings section.
NOTE:
If the password jumper setting is disabled, the existing system password and setup password are deleted and you
need not provide the system password to boot the system.
Steps
1. To enter System Setup, press F2 immediately after turning on or rebooting your system.
2. On the System Setup Main Menu screen, click System BIOS > System Security.
3. On the System Security screen, verify that Password Status is set to Unlocked.
Pre-operating system management applications
19
To Next Page
Loading...
