Table 15. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to Disabled by default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device.
Table 16. ISCSI Device1 Settings screen details
Option Description
Connection 1 Enables or disables the iSCSI connection. This option is set to Disable by default.
Connection 2 Enables or disables the iSCSI connection. This option is set to Disable by default.
Connection 1 Settings Enables you to control the configuration for the iSCSI connection.
Connection 2 Settings Enables you to control the configuration for the iSCSI connection.
Connection Order Enables you to control the order for which the iSCSI connections will be
attempted.
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 17. Integrated Devices details
Option Description
User Accessible USB Ports Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports; selecting All Ports Off (Dynamic) disables all front and back
USB ports during POST. This option is set to All Ports On by default.
When user accessible USB ports is set to All Ports Off (Dynamic) the
Enable Front Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the OS runtime.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Internal USB Port Enables or disables the Internal USB Port. This option is set to On or Off.
This option is set to On by default.
iDRAC Direct USB Port The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Integrated RAID Controller Enables or disables the integrated RAID controller. This option is set to
Enabled by default.
Embedded NIC1 and NIC2 Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled
(OS), the NIC may still be available for shared network access by the
embedded management controller. Configure the Embedded NIC1 and NIC2
option by using the NIC management utilities of the system.
Embedded Video Controller Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the
primary display even if add-in graphic cards are installed. When set to
Disabled, an add-in graphics card will be used as the primary display. BIOS
Pre-operating system management applications 13
To Next Page
Loading...
