Dell EMC VxFlex Series - Page 161

3. Select System Settings.
4. In the System Settings navigation pane, select Connection.
5. Scroll down to the AMS Secured Connectivity Actions section.
6. Under Set Secured Connection Status option, do any of the following
(depends on the default secure/non-secure setting):
l
To disable AMS-MDM secure connectivity (to move from secure to non-
secure connectivity):
a. Verify that the Enable AMS Secured Connection checkbox is selected
(default selection).
b. Deselect the Enable AMS Secured Connection checkbox.
Security Management
Dell EMC VxFlex Ready Node AMS User Guide 161