Dell EMC VxRack FLEX - Configuring Scaleio Features

/opt/emc/scaleio/<component_name>/diag/get_info.sh -d <output_path
where the <component_name> can be mdm, tb, or sds.
The get_info.sh command removes everything in the <output_path>.
Ensure you back up any files you want to keep before running the command.
b On an SDC node, the Installation Manager collects only the drv_cfg.txt file. Use the
following commands to check the basic configuration and state:
/opt/emc/scaleio/sdc/bin/drv_cfg --query_mdms
/opt/emc/scaleio/sdc/bin/drv_cfg --query_tgts
/opt/emc/scaleio/sdc/bin/drv_cfg --query_vols
Configuring ScaleIO features
VxRack System FLEX supports the following ScaleIO features:
•
Extended 5-node Meta Data Manager (MDM) cluster
•
LDAP user authentication
•
In-flight checksum
•
Public and private key pair authentication
•
Instant maintenance mode
•
ESRS integration
For information on configuring ScaleIO features, refer to ScaleIO documentation located at
support.emc.com.
Managing ScaleIO operations | 10