Dell EqualLogic PS Series - Page 58

Installation and Setup Index
Index-2
GUI
creating volumes
4-3
setting RAID policy 3-7, 3-8
H
Host Integration Tools, description 3-6
hosts
Flow Control recommendation
2-3
Jumbo Frames recommendation
2-3
I
initiator (iSCSI)
accessing a volume
4-6
computer requirements 4-6
defined 1-2
iSNS, configuring 5-1
J
Jumbo Frames recommendation 2-3
L
login
CLI method
3-7
GUI method 3-8
M
member
default gateway
3-2
defined 1-1
naming 3-2
netmask 3-2
network address 3-2
RAID policy 3-7
N
netmask, member setting 3-2
network
array IP address
3-2
configuring multiple interfaces 5-1
group IP address 3-3
improving performance 2-2
PS5000 configurations 2-9
PS5500 configurations 2-20
recommendations 2-2
requirements 2-2
network interfaces
configuring
3-2
NTP server, configuring 5-1
P
power
PS5000 requirements
2-8
PS5500 requirements 2-16
PS5000 array
connecting network cables
2-9
connecting power cables 2-8
connecting the serial cable 2-11
control module support 2-5
disk support 2-5
environmental requirements 2-4
hardware installation 2-3
hardware requirements 2-5
increasing bandwidth 2-2
initializing 3-2
multipath I/O recommendation 2-2
network address 3-2
network configurations 2-9
network recommendations 2-2
network requirements 2-2, 2-9
power configurations 2-8
power requirements 2-4
powering on 2-11
protecting from discharge 2-1
rack mount requirement 2-7
RAID policy 3-7
RAID support 3-8
shipping box contents 2-5
software configuration 3-1
steps for installing 2-7
subnet access recommendation 2-2
technical specifications 2-4