Need help?Do you have a question about the Dell EqualLogic PS-M4110 and is the answer not in the manual?
General| Model | PS-M4110 |
|---|---|
| Category | Storage |
| Form Factor | Blade |
| Storage Capacity | Up to 14.4 TB |
| RAID Support | RAID 5, RAID 6, RAID 10, RAID 50 |
| Hot-Swap Bays | Yes |
| Data Transfer Rate | 10 Gbps |
| Drive Types | SAS |
| Power Supply | Redundant power supplies |
| Interface Type | SAS |
| Management | SNMP, CLI |
Step-by-step instructions for safely powering down and rebooting the PS-M4110 blade storage array.
Essential guidelines for protecting the PS-M4110 array from electrostatic discharge (ESD) and physical damage during handling.
Procedures for safely removing the entire PS-M4110 blade storage array from the M1000e enclosure.
Critical requirements and best practices for handling PS-M4110 drives to prevent damage and ensure proper operation.
Overview of procedures for removing and installing drives, along with general guidelines and restrictions for drive maintenance.
Step-by-step instructions for safely removing a drive from its slot within the PS-M4110 blade storage array.
Step-by-step instructions for safely installing a new drive into a slot within the PS-M4110 blade storage array.
Critical requirements and precautions for handling control modules, including ESD protection and slot filling.
Procedures for replacing a failed or upgrading a control module, including requirements for microSD card transfer.
Detailed procedures covering various scenarios for replacing one or both control modules in the array.
Step-by-step instructions for safely removing a control module from its slot within the PS-M4110 array.
Step-by-step instructions for safely installing a control module into its designated slot in the PS-M4110 array.
Steps to diagnose and resolve issues that cause the PS-M4110 array to halt during the startup process.
Procedures for identifying and resolving communication loss issues between the PS-M4110 array and the network.
Procedures for diagnosing and resolving problems related to control module functionality, LEDs, and firmware.
Steps for diagnosing and resolving issues concerning the PS-M4110 array's hard drives, including LED indicators and physical checks.
To Next Page
