Dell EqualLogic PS-M4110 Hardware Owner's Manual Chapter Identifying Control Module Failures
Inserting the microSD Card
1. Align the microSD card so the arrow on the card points towards the microSD card slot in the control module
(callout 1 in Figure 30). When correctly positioned, the notch on the card will correspond to the slot.
Figure 30: Inserting the microSD Card
2. Firmly press the card into the slot until it clicks into place (callout 2 in Figure 30).
3. Install the control module in the array. See Installing a Control Module on page 44.
4. Make sure the control module is operational. See Interpreting Control Module LEDs on page 37.
48