If installing the array into a top slot in the M1000e chassis
a. Align the guide rails on the top of the PS-M4110 array with the guide rails at the top of the inside of
M1000e chassis, as shown in Figure 13.
b. Begin to slide the array into the enclosure slot, making sure that the array's guide rails insert into the
guide rails within the M1000e chassis, as shown in Figure 13. When properly inserted, the array should
hang from the enclosure guide rails and slide smoothly into the enclosure.
If installing the array into a bottom slot in the M1000e chassis
a. Align the guide rails on the bottom of the PS-M4110 array with the guide rails at the bottom-inside of
M1000e enclosure, as shown in Figure 14.
b. Begin to slide the array into the M1000e enclosure slot, making sure that the array's guide rails rest on
top of the guide rails within the M1000e enclosure, as shown in Figure 14. Be sure to support the front of
the array as you slide it into the enclosure. When properly inserted, the array should ride on top of the
chassis rails and slide smoothly into the slot.
Figure 13: Installing the Array in a Top Slot
21
Dell EqualLogic PS-M4110 Hardware Owner's Manual If installing the array into a top slot in the M1000e chassis
To Next Page
Loading...
