Removing the microSD Card
Caution: To reduce the risk of losing or damaging the microSD card, do not remove it until you are ready to
install it in the replacement control module.
1. Firmly push on the microSD card in its slot to release the spring mechanism (callout 1 in Figure 29). The
microSD card will partially eject itself from the housing.
2. Gently pull the card straight out of the slot (callout 2 in Figure 29).
3. Place the microSD card on a flat surface where it will be protected from electrostatic charge.
Figure 29: Removing the microSD Card
47
Dell EqualLogic PS-M4110 Hardware Owner's Manual Removing the microSD Card
To Next Page
Loading...
