Need help?Do you have a question about the Dell EqualLogic PS4100 and is the answer not in the manual?
General| Category | Storage |
|---|---|
| Drive Bays | 12 |
| RAID Levels | RAID 5, RAID 6, RAID 10, RAID 50 |
| Storage Controllers | Dual controllers |
| Model | EqualLogic PS4100 Series |
| Form Factor | 2U Rackmount |
| Drive Types Supported | SAS, SSD |
| Network Interfaces | 4 x 1GbE |
| Management | Dell EqualLogic Group Manager |
| Power Supplies | Dual, hot-swappable |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
Details the importance of using an electrostatic wrist strap to prevent damage.
Step-by-step guide on how to safely shut down and restart the storage array.
Methods to identify a drive failure using LEDs, console messages, and CLI commands.
Essential guidelines for safely handling and storing storage drives.
Rules and recommendations for installing new drives into the array.
Step-by-step instructions for removing a 2.5-inch drive from the array.
Step-by-step instructions for installing a 2.5-inch drive into the array.
Step-by-step instructions for removing a 3.5-inch drive from the array.
Step-by-step instructions for installing a 3.5-inch drive into the array.
Methods to detect and diagnose issues with control modules.
Safety and procedural guidelines for handling control modules.
Step-by-step instructions for replacing a faulty control module.
Procedures for safely removing a control module from the array.
Step-by-step instructions for installing a control module into the array.
Step-by-step guide for safely removing a power supply and cooling module.
Step-by-step guide for installing a new power supply and cooling module.
To Next Page
