EasyManua.ls Logo

Dell EqualLogic PS4100 - 1 Basic Storage Array Information; Protecting Hardware from Electrostatic Discharge

Dell EqualLogic PS4100
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1 Basic Storage Array Information
This chapter includes information about the location and basic operation of the replaceable components in
a storage array, tools and equipment you will need, protecting hardware from electrostatic discharge, and
power on and off operations.
Notes, Cautions, and Warnings
A NOTE indicates important information that helps you make better use of your system.
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
A WARNING indicates a potential for property damage, personal injury, or death.
Recommended Tools
You will need the following items to perform the procedures in this section:
• Bezel key
• Wrist grounding strap
Protecting Hardware
Protect a PS Series array from electrostatic discharge. When handling array hardware, make sure you use
an electrostatic wrist strap or a similar form of protection.
To use a wrist strap:
1. Connect the steel snap on the coil cord to the stud on the elastic band. See Figure 1.
Figure 1 Using an Electrostatic Wrist Strap
2. Fit the band closely around your wrist.

Table of Contents

Other manuals for Dell EqualLogic PS4100

Related product manuals