PS4100 Hardware Maintenance Guide Maintaining Drives
13
2. Press the release button (callout 1 in Figure 10). The drive latch opens and the drive emerges partway
from the array (callout 2).
3. Pull the drive out by the handle until it is free of the drive bay (callout 3).
Figure 10 Removing a 3.5-Inch Drive
Installing a 3.5-inch Drive
The 3.5-inch drives are installed horizontally, with the drive release latch to the left and the drive label to
the right.
1. Wear electrostatic protection when handling a drive. See Protecting Hardware on page 1.
2. Open the drive release latch.
3. Hold the drive by the carrier and slide the drive most of the way into a slot (callout 1 in Figure 11).
To Next Page
Loading...
