PS4100 Hardware Maintenance Guide Maintaining Drives
15
Removing a Drive Blank
Warning: To maintain proper system cooling, all empty drive bays must have drive blanks installed.
1. Remove the bezel. See Removing the Bezel on page 2.
2. Press the release tab and slide the drive blank out until it is free of the drive bay. See Figure 12 or Figure
13.
Figure 12 Removing and Installing a 3.5-Inch Hard-Drive Blank
Figure 13 Removing and Installing a 2.5-Inch Hard-Drive Blank
Item Description
1 Drive blank
2 Release tab
To Next Page
Loading...
