Figure 19: Removing a Drive - Using the Release Latch
3. Open the drive release latch the rest of the way, so that it is fully open, as shown in callout 2 in Figure 19.
As you do this, the drive will rise partially out of its slot, exposing enough of the drive to grip with your
hands.
4. Grip the sides of the drive with your hand to pull it up and out, until it is completely free of its slot, as shown
in Figure 20.
Caution: Do not pull the drive out of its slot by pulling on the drive release latch. This could damage the latch
and the drive.
31
Dell EqualLogic PS-M4110 Hardware Owner's Manual Removing a Drive
To Next Page
Loading...
