Figure 5. Two-Node iSCSI SAN-Attached Cluster
1. public network
2. cluster node
3. private network
4. iSCSI connections
5. Gigabit or 10 Gigabit Ethernet switches
6. storage system
Gigabit NICs can access the 10 Gigabit iSCSI ports on the EqualLogic PS4110/PS6010/PS6110/PS6510 storage systems if
any one of the following conditions exist:
• The switch supports both Gigabit and 10 Gigabit Ethernet.
• The servers connected to a Gigabit Ethernet switch are cascaded to the 10 Gigabit Ethernet that is attached to
the storage system.
15
To Next Page
Loading...
