Removing the eMMC-card
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
NOTE: The computer is shipped with either hard-drive assembly or eMMC-
card assembly depending on the configuration ordered.
1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Remove the battery.
Procedure
1 Remove the screws that secure the eMMC-card assembly to the palm rest and
keyboard assembly.
37
To Next Page
Loading...
