Removing the display back-cover
and antenna assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the display hinges.
5 Remove the display bezel.
6 Remove the display panel.
7 Remove the camera.
Procedure
After performing the steps in prerequisites we are left with the display back-cover
and antenna assembly.
84
To Next Page
Loading...
