b. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to
the microprocessor thermal-cooling assembly.
2. Place the back of the microprocessor thermal-cooling assembly under the palm rest, and lower
the assembly onto the system board.
3. Connect the fan power cable to the system board.
4. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
5. Replace the EMI shield.
6. Replace the keyboard.
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...hecked%20ok/Inspiron/1150/1150%20SM/thermal.htm (3 of 3)6/21/2004 12:41:08 AM
To Next Page
Loading...
