Connect a power adapter to provide power to your computer and charge the
battery.
2 USB 3.1 Gen 1 (Type-C) port/DisplayPort
Connect peripherals such as external storage devices, printers, and external
displays. Provides data transfer speeds up to 5 Gbps.
NOTE: An adapter (sold separately) is required to connect a
DisplayPort device.
3 HDMI port
Connect a TV or another HDMI-in enabled device. Provides video and audio
output.
4 USB 3.1 Gen 1 port with PowerShare
Connect peripherals such as storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge
your USB devices even when your computer is turned o.
NOTE: If your computer is turned o or in hibernate state, you must
connect the power adapter to charge your devices using the
PowerShare port. You must enable this feature in the BIOS setup
program.
NOTE: Certain USB devices may not charge when the computer is
turned o or in sleep state. In such cases, turn on the computer to
charge the device.
5 Headset port
Connect headphones or a headset (headphone and microphone combo).
Right
1 SD-card slot
Reads from and writes to the SD card.
2 USB 3.1 Gen 1 port
11
To Next Page
Loading...
