The following image provides a visual representation of the procedure to install the solid-state drive mounting bracket when
replacing a M.2 2280 solid-state drive with a M.2 2230 solid-state drive.
Steps
1. Remove the 2230 solid-state drive or 2280 solid-state drive, whichever applicable.
2. Peel the Mylar that covers the solid-state drive mounting-bracket and mounting-bracket slot.
3. Slide and remove the solid-state drive mounting-bracket from the mounting-bracket slot on the palm-rest and keyboard
assembly.
4. Rotate the solid-state drive mounting-bracket.
5. Slide the solid-state mounting-bracket into the mounting-bracket slot on the palm-rest and keyboard assembly.
6. Adhere the Mylar that covers the solid-state drive mounting-bracket and mounting-bracket slot.
7. Install the 2230 solid-state drive or 2280 solid-state drive, whichever applicable.
Removing and installing components
31
To Next Page
Loading...
