Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
Next steps
1. Install the system board.
2. Install the power-button with optional fingerprint reader.
3. Install the display assembly.
4. Install the fan.
5. Install the touchpad.
6. Install the speakers.
7. Install the I/O board.
8. Install the power-adapter port.
9. Install the wireless card.
10. Install the M.2 2280 solid-state drive.
11. Install the M.2 2230 solid-state drive.
12. Install the coin-cell battery.
13. Install the 3-cell battery or the 4-cell battery, whichever applicable.
14. Install the base cover.
15. Follow the procedure in After working inside your computer.
Removing and installing components 61
To Next Page
Loading...
