62 | Replacing the System Board
Postrequisites
1 Replace the mSATA card. See "Replacing the mSATA Card" on page 45.
2 Replace the wireless Mini-Card.
See "Replacing the Wireless Mini-Card" on page 41.
3 Replace the hard drive. See "Replacing the Hard Drive" on page 37.
4 Replace the battery. See "Replacing the Battery" on page 33.
5 Replace the palm-rest assembly.
See "Replacing the Palm-Rest Assembly" on page 29.
6 Replace the keyboard. See "Replacing the Keyboard" on page 23.
7 Replace the optical drive.
See "Replacing the Optical-Drive Assembly" on page 17.
8 Replace the memory module(s).
See "Replacing the Memory Module(s)" on page 13.
9 Follow the instructions in "After Working Inside Your Computer" on page 9.
Entering the Service Tag in system setup
1 Turn on the computer.
2 Press <F2> during POST to enter the system setup program.
3 Navigate to the Main tab and enter your computer’s Service Tag in the
Service Tag Input field.
OM_Book.book Page 62 Tuesday, October 16, 2012 11:59 AM
To Next Page
Loading...
