Replacing the status-light lens
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Post-requisites
• Procedure
Post-requisites
1. Follow the procedure from step 2 to step 8 in “Replacing the base cover”.
2. Replace the keyboard.
3. Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
4. Replace the battery.
Procedure
Align the status-light lens with the guide on the palm-rest assembly.
32
50 Replacing the status-light lens