Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the top-cover assembly with the slots on the base cover
and snap the top-cover assembly in place.
2 Replace the screws that secure the base cover to the top-cover
assembly.
3 Turn the computer over.
17
To Next Page
Loading...
