3 Remove the jumper plug and replace it on the CMOS jumper-pins.
1 jumper plug 2 CMOS jumper-pins
3 password jumper-pins
4 Follow the procedure from step 4 to step 5 in “Replacing the processor
fan”.
5 Replace the base cover.
6 Turn on your computer and wait till the operating system is completely
loaded.
7 Shut down your computer.
8 Remove the base cover.
9 Follow the procedure from step 1 to step 2 in “Removing the processor
fan”.
10 Replace the jumper plug to its original position.
61
To Next Page
Loading...
