Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Insert a new coin-cell battery (CR2032) into the battery socket with the positive
side facing up, and snap the battery into place.
2 Rotate the side-chassis towards the computer until it snaps into place.
3 Place the computer in an upright position.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
54