Replacing the palm-rest and keyboard
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm rest and keyboard assembly on a flat surface.
Post-requisites
1. Replace the power button with fingerprint reader (optional).
2. Replace the system board.
3. Replace the power-button board.
4. Replace the I/O board.
5. Replace the display assembly.
6. Replace the power-adapter port.
7. Replace the touchpad.
8. Replace the hard drive.
9. Replace the speakers.
10. Replace the wireless card.
11. Replace the solid-state drive.
12. Replace the optical-drive connector board.
13. Replace the battery.
14. Replace the base cover.
15. Replace the optical drive.
43
78 Replacing the palm-rest and keyboard assembly
To Next Page
Loading...
