Do you have a question about the Dell Inspiron 3847 and is the answer not in the manual?
Tcase | 72.72 °C |
---|---|
Bus type | DMI |
Stepping | C0 |
Tjunction | - °C |
FSB Parity | No |
Processor cache | 6 MB |
Processor cores | 4 |
Processor model | i5-4460 |
System bus rate | 5 GT/s |
Processor family | Intel® Core™ i5 |
Processor series | Intel Core i5-4400 Desktop series |
Processor socket | LGA 1150 (Socket H3) |
Processor codename | Haswell |
Number of QPI links | 0 |
Processor frequency | 3.2 GHz |
Processor cache type | Smart Cache |
Configurable TDP-down | - W |
Processor lithography | 22 nm |
Processor manufacturer | Intel |
Processor front side bus | - MHz |
PCI Express slots version | 3.0 |
Processor boost frequency | 3.4 GHz |
Processor operating modes | 32-bit, 64-bit |
PCI Express configurations | 1x16, 2x8, 1x8+2x4 |
Thermal Design Power (TDP) | 84 W |
Number of processors installed | 1 |
Maximum number of PCI Express lanes | 16 |
Memory types supported by processor | DDR3-SDRAM |
Memory voltage supported by processor | 1.5 V |
Memory clock speeds supported by processor | 1333, 1600 MHz |
Memory bandwidth supported by processor (max) | 25.6 GB/s |
Maximum internal memory supported by processor | 32 GB |
Scalability | 1S |
Processor code | SR1QK |
Processor ARK ID | 80817 |
Processor package size | 37.5 x 37.5 mm |
Supported instruction sets | AVX 2.0 |
Thermal solution specification | PCG 2013D |
Intel Identity Protection Technology version | 1.00 |
Intel® Matrix Storage Technology (Intel® MST) | - |
Intel Stable Image Platform Program (SIPP) version | 0.00 |
On-board graphics card ID | 0x412 |
Discrete graphics card model | Not available |
On-board graphics card model | Intel® HD Graphics 4600 |
On-board graphics card family | Intel® HD Graphics |
Maximum on-board graphics card memory | 1.024 GB |
On-board graphics card OpenGL version | 4.0 |
On-board graphics card base frequency | 350 MHz |
On-board graphics card DirectX version | 11.1 |
On-board graphics card dynamic frequency (max) | 1100 MHz |
Number of displays supported (on-board graphics) | 3 |
Intel® Virtualization Technology (Intel® VT) | VT-x, VT-d |
Memory slots | 2x DIMM |
Internal memory | 8 GB |
Memory channels | Dual-channel |
Memory clock speed | 1600 MHz |
Maximum internal memory | 16 GB |
Memory layout (slots x size) | 2 x 4 GB |
HDD size | 3.5 \ |
HDD speed | 7200 RPM |
HDD interface | SATA III |
Storage media | HDD |
Optical drive type | DVD Super Multi |
Total storage capacity | 1000 GB |
Compatible memory cards | SD, SDHC, SDXC, Memory Stick (MS), MS PRO, MMC, MMC+, xD |
Operating system architecture | 64-bit |
Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Cabling technology | 10/100/1000Base-T(X) |
Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
USB 2.0 ports quantity | 6 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
Chassis type | Mini Tower |
Product color | Black |
Placement supported | Vertical |
Audio system | Waves MaxxAudio 4 |
Product type | PC |
Motherboard chipset | Intel® H81 |
Audio output channels | 5.1 channels |
Power supply | 300 W |
Power supply input voltage | 100 - 240 V |
Power supply input frequency | 50 - 60 Hz |
Operating altitude | -15.2 - 3048 m |
Non-operating altitude | -15.2 - 10668 m |
Storage temperature (T-T) | -40 - 65 °C |
Operating temperature (T-T) | 10 - 35 °C |
Operating relative humidity (H-H) | 20 - 80 % |
Sustainability certificates | ENERGY STAR |
Cables included | AC |
Depth | 431.8 mm |
---|---|
Width | 177.8 mm |
Height | 368.3 mm |
Weight | 7930 g |
Essential guidelines for protecting the user and computer hardware from damage and injury.
Lists necessary tools for performing component maintenance and replacement procedures.
Illustrates the internal arrangement of major computer components for identification.
Details and labels the various connectors and jumpers on the computer's main system board.
Lists final steps and checks required after replacing the computer cover.
Steps to complete before starting the memory module removal process.
Detailed steps for physically removing memory modules from their slots.
Step-by-step guide for inserting and securing memory modules.
Final actions to take after successfully installing new memory modules.
Steps required before proceeding with graphics card removal.
Detailed instructions on how to remove the graphics card.
Guide for correctly seating and securing the graphics card in its slot.
Final actions needed after installing the graphics card.
Steps to perform before removing the front bezel.
Detailed steps to release and remove the front bezel from the chassis.
Steps for aligning and securing the front bezel back onto the chassis.
Final steps after the front bezel has been replaced.
Steps to take before removing the wireless mini-card.
Detailed steps for disconnecting and removing the wireless mini-card.
Steps to insert and connect the wireless mini-card.
Final actions after replacing the wireless mini-card.
Steps required before removing the primary hard drive.
Steps for mounting and connecting the new primary hard drive.
Final actions after replacing the primary hard drive.
Steps to take before removing the secondary hard drive.
Steps for mounting and connecting the secondary hard drive.
Final steps after replacing the secondary hard drive.
Steps required before removing the optical drive.
Steps for inserting and securing the optical drive.
Final actions after replacing the optical drive.
Guide for preparing the chassis and installing a secondary optical drive.
Steps to take before removing the front I/O panel.
Steps to align and connect the front I/O panel.
Final actions after replacing the front I/O panel.
Steps required before removing the power-button module.
Steps to align and connect the power-button module.
Final actions after replacing the power-button module.
Steps to take before removing the chassis fan.
Detailed steps for disconnecting and removing the chassis fan.
Steps to align and connect the chassis fan.
Final actions after replacing the chassis fan.
Steps required before removing the processor fan and heat sink.
Steps to align and secure the processor fan and heat sink.
Final actions after replacing the processor fan and heat sink assembly.
Steps to take before removing the processor.
Detailed steps for releasing and removing the processor.
Steps to align and seat the processor correctly.
Final actions after installing the processor.
Steps required before removing the coin-cell battery.
Detailed instructions for removing the coin-cell battery.
Steps to insert and secure the coin-cell battery.
Final actions after replacing the coin-cell battery.
Steps to take before removing the power-supply unit.
Detailed steps for disconnecting and removing the power-supply unit.
Steps to align and connect the power-supply unit.
Final actions after replacing the power-supply unit.
Steps required before removing the system board.
Steps to place and secure the system board.
Final actions after replacing the system board.
Steps to input the system's service tag into the BIOS after board replacement.
Detailed steps for downloading and installing BIOS updates from Dell's support website.